Panasonic Lumix DMW-YAGH Interface Unit for GH4
- Street: seminarstrasse 91
- City: zuerich
- Country: Switzerland
- Zip/Postal Code: 8057
- Listed: 30 October 2014 10 h 58 min
- Expires: This ad has expired
Description
NEW, never used!
Product Highlights:
For Professional Audio/Video Workflows
2x Monaural XLR Inputs
Line/Mic Level Switch & Phantom Power
Audio Level Display Monitor
2x 3G-SDI Capable BNC Connectors
2x HD-SDI Capable BNC Connectors
Quad-Link SDI Output for 4:2:2/10-Bit 4K
HDMI Output
Timecode In
12VDC 4-Pin XLR Power Input
The Lumix DMW-YAGH Interface Unit for GH4 from Panasonic is designed to give the Lumix DMC-GH4 camera the video, audio, and power connectivity required for professional video workflows. When attached to the GH4, the Interface Unit has 2 monaural XLR inputs for line or condenser microphones, and gives you independent volume control of the left and right channels. There is also an audio level display monitor and +48V of phantom power for each channel.
When it comes to video outputs, the Interface Unit provides four BNC connectors – two 3G-SDI capable and two HD-SDI capable. It outputs quad-link SDI 4K video in 4:2:2 10-bit, dual-link 4:2:2 10-bit 1080p up to 60 fps, or four simultaneous 1080p streams up to 30 fps – all with timecode. The Interface Unit also has a BNC connector for timecode input, and converts the GH4’s micro HDMI output to a full-sized HDMI output. For power, a 4-pin XLR 12VDC input is available.
Note: The Interface Unit is not powered by the GH4 and requires an external 4-pin XLR 12VDC power source for use.
Note: When using 4:2:2/10-bit output, simultaneous video recording to an SDHC/SDXC memory card in the DMC-GH4 is not possible.
more information:
http://www.bhphotovideo.com/c/product/1028546-REG/panasonic_dmc_gh4_yagh_lumix_yagh_interface_unit.html
3177 total views, 1 today